Ultimaker hinges for front door - 1 piece printed

Ultimaker hinges for front door - 1 piece printed

Description

https://youtu.be/Bd-64h_h1CA Quick video to show the printing/cleaning/checking and final settings. I designed these 3D printed hinges for an Ultimaker 2 door. No need of a set of bolt/screw to hold the moving part together! One printing and you have a functional piece !! You will find the hinges: 1_LongHinge: for top and middle hinges 2_Oh-face_Hinge: less material and an Oh face on it ^^ 3_BottomHinge: for the bottom hinge Depending to the piece of plate you will put behind the hinge, you might need those spacers 4_SmallSpacerKit: 1, 2, 3, 4 and 5mm kit for 3_BottomHinge 5_SpacerKit: 1, 2, 3, 4, and 5mm kit for 1_LongHinge and 2_Oh-face_Hinge The plastic plate I used measured 30x30cm, 4mm thickness Every holes have a 4mm diameter (spacers holes are 4.2mm) I had to replace the 3 screws of the UM2 by new one (longer).

Statistics

Likes

3

Downloads

0