Bontech BMG Prusa Bear MK3s FDM Printable Extruder, Brass inserts
Description
I decided to replace all but one of the nut slots with brass inserts. Due to some filaments being more brittle than standard PETG, I reworked some parts to work better with carbon fiber filaments. * The part cooling fan shroud has an extra bolt to mount it, and some extra clearance was added for the thermister wire. * The Pinda bracket has been split into two pieces, allowing the clamping section to be printed flat. This stops it from splitting along the middle of the bolt hole. * For those wanting to use a revers bowden there is a modified filament sensor cover that takes an Embedded Bowden Coupling. * I also added a badge that can be inserted to the front of the extruder. NOTE* Some bolts may have different lengths from the source stl. I'll update with all the correct M3 hardware once I've confirmed everything. https://www.aliexpress.com/item/32891208745.html?spm=a2g0s.9042311.0.0.41394c4dVWpl2O
Statistics
Likes
8
Downloads
0