Enhanced Dual Ducts for iFlight MegaBee v1
Description
This is an enhanced dual duct for the iFlight MegaBee (original v1 version). It has an angular aerofoil shape and super small tolerance/clearing to uncut 3 inch ducts, giving it MUCH more additional lift than the original ducts it came with and also less turbulance. Having the front and rear ducts connected like this will also reduce vibrations quite a bit. Use this with regular uncut 3 inch props, I recommend HQProp Durable 3X4X3 V1S. Tolerance is so small that they will scrape just a tiny bit when they're new, but don't worry, they'll sand themselves down within a second or two, just arm and see if they spin, then use roll and pitch while still on the ground for let's call it automatic prop balancing... Trust me, works fine. ;) Print these in PETG. You'll need to only support overhangs of 60° and more; everything below will work fine without supports on most printers.
Statistics
Likes
34
Downloads
0