iFlight MegaBee GoPro HERO 5 Session Vibration Damping Mount for ReelSteady Go
Description
This is a GoPro HERO 5 Session mount for the iFlight MegaBee (might fit other frames too, not sure) with 10° uptilt that has special damping springs to isolate the GoPro camera from the motor vibrations for the Session 5 to work properly with ReelSteady Go. It also has cutouts for the TBS Jello Guard ND filters, but can of course also be used without an ND filter. In fact, on noisy builds I'd recommend not using ND filters and going with shorter shutter speeds when stabilizing your video with ReelSteady Go, because the software will make it stable anyway, but stabilized motion blur does not look great. ;) The thickness of the damping springs is designed for this being printed with 95A Shore hardness TPU. The uptilt angle is designed at 8° because the lower part drops a bit so it comes in at 10°. If you're using harder TPU and they feel too stiff, carefully cut some material away until they're wuite wobbly, but still holding the camera's weight. Might not be super easy to print i.e. removing the supports that it needs, especially with TPU, but in return for the cleanup hassle, it works like a charm! :)
Statistics
Likes
33
Downloads
0