Action Cam and GoPro Camera Holder and Screw Mount
Description
This is a screwable mount or holder for a generic ActionCam or GoPro camera. The base plate measures 44 x 44 mm. There are four holes in the corners of the base plate with a diameter of 3,3 mm (for M3 screws), respectively. There are also matching recesses for M3 nuts. The distance between these holes is 34 mm vertically and horizontally. The joint part itself measures a width of 14 mm in total (without nut), while the middle fin and the spaces between it measure 3 mm. The circular part of the fins has a diameter of 15 mm and the hole in the middle has a diameter of 5,3 mm (for a M5 screw). At on end, there is a recess for a matching M5 nut. The length of the M5 screw, holding everything in place, should not be less than 19 mm (without the head).
Statistics
Likes
0
Downloads
0