TRX4/TRX6 Mamba-X ESC Mount
Description
This is a bracket to hold a Mamba-X ESC on a TRX4/6. This design was inspired by Digitalmunk73's design (link below), but was made by me on Fusion 360. This design differs in a couple of ways: • Everything is thicker/Stronger • This design adds a bar off of the ESC Power Switch bracket that allows for securing wires with zip ties, for a cleaner installation. This requires a raft and supports to be used for printing. • It moves the ESC back 2mm, allowing more room between the body and the ESC. This is not really an issue on the TRX4, but the clearances on the TRX6 are very tight. https://www.thingiverse.com/thing:3427458
Statistics
Likes
13
Downloads
0