Sonicmodell Binary Gimbal (Mini 3D Pro) adapter
Description
This design has not been fully tested yet! The baseplate is used to mount a Feiyou-Tech Mini 3D Pro Gimbal to the Sonicmodell Binary. It offers mounting provisions for a Micro FPV Camera up front, mounted via a metal bracket that usually comes with these types of cameras. The Baseplate slots into the pre-cut rectangular holes and is screwed down using two M3 screws. I took the M3 nuts that have been installed by the factory for the main landing gear, since I won't use it. Mark the holes by attaching the Baseplate, drill two 3.5 mm holes and install the nuts. As simple as that. ;) The hole in the Baseplate may be used to pass the cables through for clean wiring. Note: The photo shows an earlier version without the micro FPV camera mounting provision.
Statistics
Likes
3
Downloads
0