Flaming Skull Pull Ball Chain, Keychain Knob | Handle | Fob | Finials
Description
This Ceiling Fan / Light pull chain, ball chain, pull string knob, handle, finial, fob is designed for use with standard #6 (3.2mm) ball chain. It will also work with smaller chain as long as you use a #6 metal connector. THE MAIN FILE WILL NEED SUPPORTS. HOWEVER, I HAVE ALSO INCLUDED A LEFT/RIGHT FILES THAT WILL PRINT WITH MINIMAL SUPPORTS (touching buildplate, 60 degree overhang angle). Just print and glue together. Simple feed the chain through the top of the print and attach a standard #6 connector to it. If using a ball chain and metal connector, you can form a loop around a keyring and hook with the other end of the connector. If you don't have a metal connector, you can print the BALL-CONNECTOR.stl file I've included. NOTE: if you print the connector in PLA it's a tight fit. Lay the chain on a hard surface, position the connector over the last ball of the chain and push down until it snaps in place. You may also use string with a large knot tied in the end. I usually print things with 10% infill - HOWEVER, if used on a ceiling fan, you may want to use a higher infill for more weight. I have designed hundreds of remixes. If you want to search by the type, visit my profile: https://www.thingiverse.com/ToaKamate/about
Statistics
Likes
24
Downloads
0