Lulzbot taz Spool holder
Description
Printed in PolyLite PLA. Printed on a Lulzbot Taz Workhorse for that printer! Took me about 50min to print the vertical holders for the spool, the holes for the screws are 3mm link for the nuts below. These nuts are great as you don't have to remove any parts from the frame to put the nuts in the slot!! The holder with the bearings took about 1.5 hour with support! The bearing is 608 skateboard 22mm bearing, fits perfectly. I suggest to print the vertical holder with the slot its easier to remove the spool for filament change! Link for the bearings: https://www.banggood.com/10pcs-Red-Sealed-Deep-Groove-Skateboard-Ball-Bearing-608-2RS-8x22x7mm-p-973640.html?rmmds=buy&cur_warehouse=CN Link for the nuts: https://www.banggood.com/50pcs-M3-T-Sliding-Nut-Zin-Plated-Carbon-Steel-T-Sliding-Nut-for-2020-Aluminum-Profile-p-1081131.html?rmmds=search&cur_warehouse=CN
Statistics
Likes
1
Downloads
0