4 IN CYCLONE SEPARATOR 2 WITH 2IN AND 40mm ADAPTER
Description
4 IN VACUUM CYCLONE SEPARATOR 2 - WITH 2IN AND 40mm ADAPTER A great thank you, for those who are appreciating and supporting my work! Financial support for this design, until now, was received from: - no one yet! If you print this project, and you are happy with the final part, do not forget to buy me a roll of filament - in order for me to be able continue to test and improve these projects or to design new ones! If you are not happy with this design or you have problem with your printed parts - send me a message, we will try to fix it together! :) If you do not want or you can't afford to buy me a roll of filament ... its ok, I still hope you enjoy printing my designs! Pace! Inside walls are aligned face to face, no extra turbions to the process off cyclone separation ! 300X300X400 REQUIRED PRINT VOLUME Big volume and long prints! Recommend using a nozzle of 1.0mm to speed up the print process! For a smaller version - 40mm hose see: https://www.thingiverse.com/thing:3183875 For a smaller version - 2inches hose see: https://www.thingiverse.com/thing:3972584 For a metal version - 4 inches hose see https://www.thingiverse.com/thing:3811097 Connections have build in place the plate adhesion - 0.6X4 - what need to be removed after print. Cyclone is design to be secured with two M8 countersunk bolts, they are also used to discharge all electrostatic accumulation! Have a flat-bar or a striped electrical conductor between them (on the outside of the Cyclone) and connect it to the ground. If the Cyclone is not connected directly on the dust drum cover, and is require to use a hose between them, in order to have easy access to the drum... see the Cyclone Collector Connector. DESIGN TO PRINT WITHOUT SUPPORT! :) By Costa
Statistics
Likes
32
Downloads
0