Celestron Nexstar 6SE HC base for AUX splitter
Description
This NexStar's hand control base was created to be able to use the 2x1 AUX port splitter connected to the celestron's HC connector because some accessories, like the StarSense camera and HC, will only work when connected to the HC plug in the NexStar 6SE telescope. You'll need: 10 M3 nuts 12 washers 4 M3x30mm screws (corners) 4 M3x10mm screws (top_holder) 2 M3x20mm screws (sides)
Statistics
Likes
10
Downloads
0