Canopy for Brickracing SB3 Ultra
Description
UPDATE: 2 versions available. - 3inch.stl - lower fins, suitable for Runcam Racer Nano 2. - 3inch-canopy-2.stl - taller fins, better camera protection, suitable for Foxeer Predator Nano. This canopy is designed specifically for [Brickracing SB3 Ultra](https://shop.brickracing.com/Frames/Brickracing-SB3-Ultra-frame-(11xx-motors)) frame. Comfortably clears 16mm high stack. Only fits a nano size FPV camera (14x14mm). You'll need two thin 25mm standoffs in the rear, six M3 screws plus 2 nuts to secure the front. Use washers as you see fit. Print in TPU. Supports on, 2 perimeters, 25% gyroid infill on 0.4mm nozzle. My print weighs 8g and feels super rigid.
Statistics
Likes
4
Downloads
0