Xiaomi Scooter Pro Turnlight
Description
This is a turn light modification for the Xiaomi Scooter (M365 or Pro) a part of a project where I also made a mount with two buttons for the handlebar (https://www.thingiverse.com/thing:3746026). Everything is powered and controlled by an Arduino Nano enclosed in the battery compartment along with a custom relay PCB. The notch (with the Mi logo on) is placed at that specific place because of the need to drill a hole for the wires, but not wanting them to be in the wheel well and in close proximity to the tires. Drilling underneath this point makes it possible to route the wires in relatively safety of the wheels and into the battery compartment. The groove is for making room for the "Xiaomi M365 mudguard bracket". (https://www.thingiverse.com/thing:3606911) Thanks to leplubodeslapin for designing this. You can use any color or material for the print (I used black PLA for the main body) but you must use transparent for the glass (obviously!). When printing you only have to mirror the housing for making a left and right turn light. The glass is symmetrical. Made in Fusion 360 and f3d-file is enclosed for you to redesign as needed. :)
Statistics
Likes
64
Downloads
0