Raspberry PI Din Mount (with fan)
Description
__!!!! REMOVE MICROSD BEFORE INSERTING RPI INSIDE !!!__ I was looking for a decent mount for my smart-home raspberry pi for DIN rail. However there were none that included cooling. That is why I made an attempt to design my. ### It's not perfect in a few ways: * Some versions of RPI sit perfectly on Standoffs, some don't. For my Asus tinkerboard I had to cut / shorten mounts near holds so it would fit * Most of cases that i've seen have you insert RPI to the half of case - so MicroSD hole can be made of corresponding size. This one doesn't - I have 2 parts - box and cover. Save yourself some money - remove microSD and insert carefully from MicroSD side. * I am using blue radiator that is used in 3D printing which fits fine on top of chip. If you have some bigger one - you would have to use pliers to remove top cover parts. ### Things that you might need to buy Here are name of things that I've bought from Aliexpress - so you don't have to search (use same name for amazon): * din rail (you should already have it, otherwise this design make no sense - local retail have it for $1.5) * silent cooling fan 5015 (12v is enough - it would be quiet enough or 5v if you want mega cooling) https://www.aliexpress.com/item/32876145149.html * (optional) M2.5 M3 Copper Inserts Brass Double Pass Knurl Nut Embedded Fastener https://www.aliexpress.com/item/32842866575.html
Statistics
Likes
18
Downloads
0