JGAurora A5S 5015 blower mount
Description
This is a dual 5015 fan mount for the JGAurora A5S, employing two 5015 blowers, one for piece cooling and one for cooling the hotend heatsink. The way I designed this piece, you can use all the stock screws and only need to buy the new 5015 blower fans, These are the fans I used on Amazon (verify your printer voltage, JGAurora A5S uses 24V fans): https://www.amazon.com/gp/product/B07DQ7F1T7/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=projectuplus-20&linkId=f2ce7536fa9fe8e62edc7dd1589be704&language=en_US The fan duct I'm using was also designed to work with this piece and can be found here: https://www.thingiverse.com/thing:3981128 I printed this with PLA, 0.2mm slices, 50% infill with supports touching baseplate only.
Statistics
Likes
19
Downloads
0