Adjustable Y Endstop for Wanhao i3 Duplicator v2.1
Description
I have modified my 3d printer to enlarge the Y dimension, and needed to move back the Y-endstop by 20mm. This endstop can be used to add 5mm, 10mm, 15mm or 20mm to the movement of your bed. Print the bracket, then run a 3mm drill through the larger holes, and a 1.5mm drill through the two microswitch mounting holes. Replace the standard bracket with this, using the original bolts to self-tap and mount the microswitch, and two M3 12mm screws with washer and bolt to attach this bracket to the frame. You may need to bend the microswitch connectors to fit the frame (as I did) - do it carefully! See the pictures for mounting detail - mine is mounted 20mm back from the original position.
Statistics
Likes
1
Downloads
0