A8 MKS GEN V1.4 board case
Description
Update 27. Nov 2019: Several modifications to part A - rear cable duct, improved rigidity of structure for mounting points (not as nice but necessary), M3 and M4 threads in mounting points (if they will work, wil keep them). Update 24. Nov 2019: Test print of part A done, but needs several design adjustments - cable routing, rigidity for screw mounting points particularly. Case to accomodate MKS GEN board instead of original Anet V1.7 in my A8, with 70 mm unused CPU computer fan. A simple fin inseide should direct the air flow to motor drivers. Board must be mounted with bottom of PCB in part B, to allow access for USB port and reset button, then mounted top facing printer, part A respectively. Part A should match the stock holes for M3 bolts in printer´s frame, so it works as adapter. 4x M4 bolts, 4x M3 from stock printer. Holes are designed to match smaller diameter of "M" thread, so you should need no nuts.
Statistics
Likes
5
Downloads
0