Galaxy Tab S6 Stand Multi Angle, Slim Design
Description
<h1>What is this?</h1> This is a slim tablet holder for the Samsung Galaxy Tab S6. There are 4 different cutouts that can be used to adjust the angle of the tablet (0°, 15°, 25° and 35°). A nice feature is that the tablet can be easy and comfortable carried around by hand when the ring is grabed. <h1>Why Edge, no Edge Version?</h1> <h2>There are two versions available:</h2> * the "Edge" version, which has a rounded edge at the bottom. Perfect version if you use the tablet in horizontal orientation the most. Because of the edge there is a slight tendency for the tablet to fall over if the tablet is used in vertical orientation and preasure is applied at the top. Happens only if the angle is 25°and above! It's realy not bad, but could happen, so be carefull. * the "No Edge" version, which will be stable even if tablet is used in vertical orientation, but has no edge at the bottom (of course also great looking...!) <h1>What if I use a case?</h1> The _9,5mm and _10,5mm gap version is when the tablet is used with a case. As suggested in the comments. :) <h1>I have a Galaxy Tab S5e, does it fit?</h1> Nope, measurements are slightly different (the S5e is a bit less thick). But I made a [Version for the S5e](https://www.thingiverse.com/thing:4704038)
Statistics
Likes
50
Downloads
0