RD9000 RC Tank with FPV
Description
Parts List: Esun PLA Pro Filament Sainsmart TPU Filament 5 x 11 x 4 Ball Bearings 3 x 10 x 4 Ball Bearings M5 Hex Nuts M5 Threaded Rods M3 Screws of various lengths M3 Hex Nuts 2205 to 2306, 1650 to 2350 kv RC drone motors Electronic Speed Controllers RC equipment to suit Battery Pack to suit All parts printed with 100% infill from Esun PLA Pro filament except the tracks which are printed from Sainsmart TPU at 100% infill. Ball bearings to be installed in each bearing pocket as designed. All 5mm shafts made from M5 threaded rods cut to length. Wheels and gears are driven by applying thread lock fluid and threading two M5 hex nuts together and tightening against each other with two wrenches as a “jam nut” setup. Test fit and install all parts carefully before applying any thread locker. All ball bearings, screws, nuts, rods, and filament purchased at Amazon.com.
Statistics
Likes
151
Downloads
0