Felgen / Car wheel rim 1:43 (for Mercedes-Benz AMG GT S Coupe)
Description
My child broke all the wheel rims of the given car model. So I designed new ones and printed them. The tires are the original ones. This type of tire is not removeable without pulling the rims from the axis. The inner axis is exactly 2mm. I printed them and checked/cleaned the diameter using a 2mm drill. There was not much to do. Finally I pushed the wheels onto the cars axis with a small bench vice. This was no problem and worked smoothly. The model you see on the car worked, but I corrected the inner side of the rims afterwards. The original tire goes a bit inwards which was not adopted 100% by my first revision. The Thingiverse STL is already a better one.
Statistics
Likes
6
Downloads
0