PVC pipe Nerf Stock with 5 degree drop
Description
Update 1/25/2020 - I wasnt totally happy with the look of the adapter, so i remixed another nerf stock adapter to fit my PVC pipe version. This is the "mk2" adapter, and attaches with the 2 pieces called "Catch". I saw another pvc pipe based nerf stock on here, and printed one and tried it, but it didn't feel quite right attached to my WIP FDL3. What it needed was a small angle or drop in it to bring up the bore axis to be at a better height. Rather than remix that one, I decided to design a while new one from scratch to my own whims and specifications. This should fit standard nerf n-strike style stock attachments, but it may fit kind of tight. You may need to file or sand the inside a little bit. I wouldn't scale it up though, because the fit on the PVC pipe is just right as-is. You will want a short length of 3/4" ID PVC pipe for this, I found about an 8" length felt right, but customize to your desires! You will also want 2 M3x25mm length screws to secure the little locking tab into the notches on the stock adapter. I printed this in PLA+ at 235C, 60C bed, 4 walls 20% infill 0.2 layer height 10 bottom and top layers. Seems strong enough but time and use will tell! Happy nerfing!
Statistics
Likes
16
Downloads
0