Gnarly Primo/RacerX TwigXL Canopy for Eagle, Ratel, Caddx Vista Canopy and VTX/RX mount
Description
UPDATE V2: New Naked Vista Mount here https://www.thingiverse.com/thing:5030402 UPDATE: New Design v3. I just discover it fit also RacerX Twig frame with 2mm mounting holes. Remove few grams to my original canopy. Now at 6g with antenna and around 4.8g without antenna. 3.4g more than original Gnarly Canopy but handle 19mm or DJI Camera and fully protect them.. This canopy allow to mount various camera. Micro, Nano, DJI, Nebula. Design to work with the 3" version but seem working with the original 2.5". I upload two versions. One can use regular 3mm tube for the Antennas and one have integrated antenna tube. I have try to keep the overall style of the original canopy because I'm in love with the Gnarly design. You can fit a Nebula or the original DJI camera. Adding Vista Mount. I recommend to use two nylon M2x20mm srews and nut to fix the Vista in the mount. Vista Mount Weight 3.5g. I also add to the 3D model a set of small printing support under the canopy and the antenna. You will have to cut them after printing. The "Basket" allowing to mount various RX and a nano VTX. There is also 2 simple shims to raise the canopy and leave more space to mount stuff on the board or if you need more space to use a 16x16 stack. - You will need 16mm M2 Screw to install the canopy and the basket in analog version - In Vista configuration you will need M2 x 25mm screw Print with 0.12 layer height. I use cura with a Ender3. It should work. I will add my settings to the files. I use support blockers to avoid having supports inside the antenna. Or you will need Strong Steel Wire to push out the supports. See one of the pictures. You can also print the version without antenna and add 3mm plastic tubes. I attach my cura settings please. Lets me know what you think in the comment .
Statistics
Likes
27
Downloads
0