Winding machine for filament
Description
My winding machine - kept simple to individual units having it hence flexible and easy to store and install, when needed. The machine can cope with spools up to 85mm wide and the centering parts are designed for 50 to 54mm inner diameter. Please, excuse my technical terms for the individual parts - I'm not a native. In the thing-files section, you ma find the assy drawing of added help to identify the indiviual parts. Guideline: You'll need to print at least: - 2x bearing_block_vXX - 1x driver_belt_wheel_vXX - 1x motor_belt_pully_4mm (for a geared motor having a shaft of 4mm) - 1x motor02_holder (for the motor referenced below in the materials list) For pulling the target filament spool print: - 1x driver_counter_lock - 1x driver_holder - 1x driver_pulley The design is setup for an M5 axel. Other parts, which you'll need: - 1x geared motor (https://www.pollin.de/p/dc-getriebemotor-zhaowei-zwpd024024-36-h-12-v-135-u-min-310591; i.e. a ZWPD024024-36-H, 12 V-, 135 U/min) - 2x ball bearings 262Z - 1x M6 wing nut - 4x M6 nuts - 5x M6 washers - 1x axel, M6 rod, roughly 190mm long - 1x 6mm closed loop timing belt GT2, 400mm I also built a little electronics box which holds the soft-start motor driver electronics. The motor starts with pushing the green button - with a soft-start - and immediately hods when pushing the red button. Details will be shown in another post.
Statistics
Likes
12
Downloads
0