Cr10s Pro Enclosure - Alternative Airflow System
Description
Since i did not like the airduct from the original enclosure project because it was a complicated print and didnt really address the airvents on the bottom of the printer (there wasnt even a base plate in the parts list), i designed my own. I bought a MDF plate for around 4€, went to the print shop and printed out my construction plan in Din A0. Then i taped the construction plan onto the MDF baseplate and cut holes into it. After cutting i used foam tape to seal up the gaps underneath the printer (probably also good against vibration).
Statistics
Likes
24
Downloads
0