Stand for kids' wave drum
Description
My son has a little drum kit. He has a little wave drum for a snare, but I couldn't find a stand that would hold it, so here we go... The band-aid is because it's not toddler-proof, yet. I am going to try reinforcing part "B." You'll need a bag of M2 screws. I used M2*5 for connecting "A" and "B", M2*12 for connecting "O" and "M", and M2*8 for everything else. Also a bag of M2 nuts, which are a pain to hold onto. This could be printed at 2x size and then use M4 screws and nuts, which are easier to manipulate. I printed everything in black PLA, except "A" and "O," which were TPU. I only used supports for part "B." This is my first thing. Sorry if the instructions are messy. Print: 3xA (preferably in flexible filament) 3xB (with supports) 3xC 3xD 1xDwH (same as D, but with a hole for tightening) 1xKey 1xE 1xF 1xG (this part needs a little work to make it function better) 1xK (my plan is to replace this with a pivot, but for now, it's a straight stand) 1xL 6xM (to double brace the bottom) 3xN 3xO (in flexible filament, preferred) The flexible filament pieces work better, in my opinion, if you print them one at a time. I printed everything with threads (Key, K, L, and G) individually, so that the threads would be nicer. Everything else could be printed in big batches. Some of the holes had to be cleaned up a bit, but everything else seemed to work okay right off the bed.
Statistics
Likes
5
Downloads
0