Geeetech A10 A10M Adjustable Z Endstop
Description
**I created a newer spring loaded version here, recommended to check it out: https://www.thingiverse.com/thing:3992884 ** Print with orientation as shown on screenshot. The default gap between the endstop block and the mount is 0.3mm. If you have a badly or well tuned printer, you can choose an endstop block with either looser or tighter tolerances (0.4 or 0.2mm). You will need an additional M3 screw. It should be at least 15mm long. It goes into the knob, and the knob + screw go into the mount from below for assembly. Possibly also fits A20, A20M, and A30 printers. Comments that confirm / deny this are most welcome.
Statistics
Likes
43
Downloads
0