On-Q Patch Panel & Mounting Brackets
Description
Our home had an On-Q system installed in it, but it was never utilized by the previous owners. The actual On-Q stuff is pretty expensive, so I decided to design and print my own brackets. These parts compression fit into the holes in the enclosure, and I've attached the exported design from Fusion 360 if you want to try to modify anything to fit your setup. **Keystone Panel** Should fit any keystone style jacks like these: https://www.amazon.com/Cable-Matters-25-Pack-Keystone-Punch-Down/dp/B004D5PFGW/ref=sr_1_3?keywords=cat6+keystone&qid=1574344964&sr=8-3 They snap into place. **Wall Mount** This one has holes that fit these: * Unifi Security Gateway * Unifi Switch 8 * Whatever model our modem is The pegs fit into this panel and you hang the device on them. **Velcro Mount** Use this to mount anything that you can wrap a strap of velcro around. **Cooling** The Unifi gear gets hot. Like too hot to touch for very long. The switch warped the PLA bracket in our setup. So I added a cooling fan to keep them from overheating in the enclosed space. I used a dremel to cut the holes in the enclosure door then mounted this: https://www.amazon.com/gp/product/B00QFWLGPU/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Statistics
Likes
11
Downloads
0