Phanteks Evolv ITX Front Spacer Pins (Airflow fix)
Description
This Spacer Pins shift the front panel of the Phanteks Evolv ITX away from the case to highly improve the air flow. In the orginal state the front air intake is choking the hardware. Also included is a longer bracket for the bottom light strip LED. Information: Weak pins weak point is the connection of the bottom hex part to the extender block. Print with 100% infill or try printing the pins laying flat to improve stability Installation: -The front plate has a metal sheet. There are metal tabs on the back that has to be bent upright to remove the metal. After removing you can see the four screws of the original pins. Unscrew and replace original pins with extended printed pins. -Remove LED from original holder. Route LED through new bracket. Extended bracket slides over the old one and covers the hole in fan filter. Cover back of LED with black electronics tape or similar to reduce light spill. Information: Weak point of the pins is the connection of the bottom hex part to the extender block. Print with 100% infill or try printing the pins laying flat to improve stability
Statistics
Likes
11
Downloads
0