SLA / Resin Prime Coat
Description
This is a Prime Coat file I made for my Elegoo Mars. Some resins just won't stick and some say to use a prime coat. So I decided to print a prime coat instead. If this sounds crazy, watch the video below. It will hopefully make a little more sense. INSTRUCTIONS Adjust the print size to match your plate dimensions, keeping the thickness at 0.2mm. 4 layers at 0.05 will get the job done and adjust the Bottom Exposure time to double the usual (so if it's normal 60 seconds, make it 120, etc) or more if needed.
Statistics
Likes
21
Downloads
0