Yoder YS 480 / 640 / 1500 Hopper Fan Shroud
Description
I did a quick design for a fan shroud that should protect the fan from rain/snow and not obstruct any air flow. It attaches via 2 sided tape (3M VHB is recommended). Should fit the side of the YS series of pellet smokers from Yoder. The shroud/duct is low profile so it should not get in the way of the stock covers. I printed my test item in NylonX (Carbon Fiber) for high temp resistance from the hot sun. I did 2,2,2 for the top, bottom, walls for layers at .3mm layer height.
Statistics
Likes
3
Downloads
0