Powerspec i3 mini bed stabilizer
Description
These were put together quickly to try and prevent the adjustable print bed from shifting, which was causing layer shifts in my prints. The "x_direction_clip" model will simply slide onto the stamped metal sub-frame and stay in place using friction. I used 2 on each side To use the "y_direction_clip" model, you will need to have one 10mm long M3x.5 socket head cap screw for each clip you use. Remove the factory 5mm long M3x.5 SHCS and fasten the clip with the 10mm screw. Be sure to align the clip vertically as you tighten the screw to lock it into place.
Statistics
Likes
3
Downloads
0