Baseplate for spindle clamp (52/55mm, 65mm, 80mm), Root CNC 3 Lite
Description
The baseplate makes it possible to mount a spindle clamp (spindle diameter: 52 or 55mm, 65mm and 80mm) for the modular Spindlemount (Root CNC 3 Lite) from FlorianBraehler (https://www.thingiverse.com/thing:2792524). Spindle clamps with a hole distance of 20x70mm, 25x80mm or 30x90mm and mounting holes for M6 screws will fit. Additional materials: 4x M6 nut 4x M6x65mm (52/55mm clamp), 75mm, (65mm clamp) 90mm (80mm clamp) screw 4x M6 washer 4x M6 spring ring 1x Aluminium spindle clamp 16x M3x16 up to 20mm allen screw Assembly: 1. Remove the supports 2. You have to heat (with a hot air blower or lighter) the m6 nut (screwed on a M6 screw) to press it into the pocket 3. Cut/smooth the backside after inserting the nuts. 4. You can use M6 screws with washers and spring rings or shorten the screws to 63mm will work to. Optional: If the holes are to tight, then drill them with 3,5 or 6,5mm.
Statistics
Likes
11
Downloads
0