Spool Holder Flashforge 600g spool
Description
I bought a roll of filament from a store and realised it wouldnt fit on my existing holder, so i decided to create this one. Feel free to download and use. Made to fit spools (upto 20mm core. Upto 200mm overall diameter, upto 70mm wide) Print settings: .2 layer height 200'c hot end 50'c bed 20% infil I made with 6mm brim around to help support the main rod Takes about 12.5hrs to print and used (180g or 60.3m of filament) Has been designed so there is no need to add supports Feel free to share and upload photos =)
Statistics
Likes
0
Downloads
0