TEVO Little Monster 7'' PanelDue V3 Touch Screen Housing

Description

This is another remix inspired by Elzariant's design of his TFT28 screen case. This time it is for the PanelDue V3 to complement my DuetWifi conversion of the Tevo Little Monster. The housing will fit the "semi-integrated" Chinese version of the PanelDue V3 which can be found here:https://www.aliexpress.com/item/4000152814384.html. I selected this version over the original PanelDue V3 due to it's compact form factor with the PCB at the back and not on the side of the panel. I designed the case to expose all connectors, buttons and SD card reader to it does not require it to be opened to e.g. update the firmware. The case also includes a newly designed foot/mount which now screws into the case from the outside, removing the need to open up the case each time the holder breaks. No support or rafts required. Other Hardware required: - 6x M3 nuts - the recess is designed to be a tight fi so the screws stay in place. Use longer screws to pull them into the plastic or heat the nut up and press it into place. - 4x M3x12 countersunk screws (use black screws for a clean look) - 2x M3x8 button head or socket headcap screws

Statistics

Category

Tags