Anycubic Chiron Level Sensor Tweak - Shorter for E3D V6
Description
I found that after installation of the E3D my sensor was about 4.4mm lower than the nozzle and leveling was impossible. So I've made a new bracket for allowing the metal magnet holder to be higher closer to the nozzle simply by making the metal holder shorter. Hope this Helps someone. Fusion 360 Links: Stock: https://a360.co/2XGZrP7 Modified (4.5mm shorter): https://a360.co/2qFfIrL
Statistics
Likes
9
Downloads
0