Land Rover Series I & II Socket for Inspection Lamp
Description
Replace missing 12V sockets inspection lamp on Land Rover Series I & II. It use standard 4mm RC bullet connectors (5mm external diameter x 20.5mm long) which are somehow similar in shape and function as the original female banana plugs. Print Plug Caps red and black then glue on to main body. Solder the bullet connectors to a length of 14 AWG silicon wire. You can glue the bullets onto the body after soldering. The lock flange use a M3 x 12mm long bolt and nut. Not the real part just a 3D printed adaptation... Original or not it is a seriously handy 12V plug! Edit 11/11/20: I thought it was obvious, but as someone mentionned, there shall be a fuse in between the plug and the battery! do not tap this plug straight from the battery!!!!
Statistics
Likes
10
Downloads
0