Bust of Nefertiti - Hollowed
Description
This is a hollowed version of Cosmo Wenman's Nefertiti bust scan. Good for SLA/SLS printing or similar - was originally sized for 6" - walls are 1.5mm thick - so sizing up should be fine - sizing down will be limited. I've included the Formlabs PreForm file since the supports I laid out worked well. Printed in Grey resin at .05 layer height. Due to the size of her headpiece you may want to add some weight inside the bottom - stick on wheel balancing weights work well. Ignore 20mm_cube.stl - files were big and had to be zipped and an STL file has to be present to post project. We did a write up of Cosmo's work on Tested.com - check it out: https://www.tested.com/inventern/454188-maker-profile-cosmo-wenmans-3d-printed-art/
Statistics
Likes
210
Downloads
0