Afinia H480 My Extruder
Description
The genuine extruder slips because the feed is loose. After using nearly 10 units, I finally realized the fundamental problem. Completely reconfigured. A bearing is required. It has an inner diameter of 3 mm and an outer diameter of 7 mm and a thickness of 3 mm. Fix the bearing with M3 - 10 mm screws. Do not use 12mm. Too fixed. The nylon lock nut (M3) is used as a guide for filament. It is necessary to drop the corner with a vise and a file. In order to prevent the nut from falling, it is necessary to bond the plates. Example: https://thingiverse-production-new.s3.amazonaws.com/assets/80/41/c7/68/ab/IMG_6331.JPG Print with ABS filament.
Statistics
Likes
1
Downloads
0