Anet E16, E12 reinforcements for Z-axis with rods
Description
This design cuts a 20mm of your Z-axis height, but to those who want a full height I updated post with remixed files. This reinforcement can be used for the other printers (those who have the same aluminium profiles), only the leight of the rods need to be changed then. I am personally using 8mm rods, but if you want to put thicker rods there are files for 10 and 12mm rod carriers. Sorry for the pictures, they turned out to be a little stretched. Parts that you will need for assembly: 2-8x560mm threaded rods, 4-8mm washers 8-M8 nuts, 8-M5x20mm screws, 4-M5X30mm screws, 4-M5 nuts, 8-M5 T-nuts
Statistics
Likes
17
Downloads
0