AR8 Drone Frame Components, Sculptcopter
Description
These parts are for the ScuptCopter AR8 Frame set. They are designed for a 5mm lowered configuration for the top plate. This means that 25mm stand offs from the top plate to the bottom late must be used. If 30mm stand offs (standard) are used, then 5mm gaps will be present for the nose cone, Antenna support arms, and gps mount. Spacer may be used to fill the gaps. The antenna support arms require the top plate to be oriented in reverse from the standard configuration, inorder for them to self "lock" into place and resist movement. They are designed for the TBS Imortal "T" V2 extended length version(s). The Antenna wire leads are pressed into the channels for security. The nose cone fits a 19mm wide camera. The session couches are 30 degrees and 25 degrees. The lowered session couches offer a lower location or space to place a foam pad between the couch and GoPro for use with ReelSteady Go. The AR8_GPS_mount-1 is designed for a TBS M8 GPS Glonass. See various pictures for sequence of installation
Statistics
Likes
3
Downloads
0