Minelab Equinox Wall Mount
Description
I wanted to hang my Minelab Equinox 800 on the wall so I don't trip on it, but couldn't find a solution I was happy with. Here I designed a slightly ramped double arm wall mount to grab the arm cuff at the bottom. Surprisingly, PLA at 20% intfil worked nice, and its strong enough for my liking. The print you see was the 4mm hole one... it forced me to use some thin screws so I made it 5mm and 6mm if you were using different screws or perhaps a drywall anchor setup. Due to the 20% intfil, I made sure the screws I used were flat on the bottom, I was worried about crushing the plastic, but not one crack sound with the setup I did. Warning: the photos are somewhat distorted, the arms look as if they were designed as a V, they were not, they are equal distance all the way out.
Statistics
Likes
34
Downloads
0