6€ Taser/Stun gun, Rechargeable!
Description
DISCLAIMER: DO NOT USE IT AGAINST ANY LIVING CREATURE Just a little fun project I made. I always wanted to make a cheap DIY Taser, now with the power of fusion 360 and a 3d printer I could final make one myself. all parts togeter cost only around 6€ i designed the taser to be custamizable by colors and Rechargabe. You can print the inside with a cheap filament and the outside shell with any color combination you like there are already supports included were they are needed so you dont need to enable supports. you can just remove them with a knife or pliers <h2>IMPORTANT</h2> Solder the high voltage generator on the same hole where the battery is soldered, if you solder the high voltage generator on the "out" hole you destroy the module and the charger!!! Parts needed: 5x M3 screw 1x M3 Nut 2x M4 Screw (30mm) 4x M4 Nut 1x [Li-ion carger module](https://www.ebay.de/itm/10x-TP4056-Micro-USB-5V-1A-Lithium-Li-Ion-Po-18650-Ladeger%C3%A4t-Modul-Board-OY/273787730518?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649) 1x [High Voltage geneerator](https://www.ebay.de/itm/Neu-DC-3V-6V-bis-400kV-400000V-Boost-Step-up-Power-Module-High-Voltage-Generator/232565141309?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649) 1x Microbutton 6x6x8.5mm (in german its called "Microtaster") 1x [Micro Switch](https://www.amazon.de/gp/product/B00CQNQN4Q/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1) [Donate if you want, need more Filament for other Projects/Prototypes ;)](https://www.paypal.me/StriK3FoRC3Creator)
Statistics
Likes
160
Downloads
0