Parametric LED Profile Clip
Description
# Parametric LED Profile Clip This is a parametric LED profile holder designed in OpenSCAD, offering some parameters for customization. It is a remix of [marr89](https://www.thingiverse.com/marr89)'s [led profile clip with screw hole](https://www.thingiverse.com/thing:3234245). The default settings are set for LED profiles with a width of 18mm and a height of 7mm, usually holding a 10mm LED strip. The attached STL-file (`LED Profile Clip.stl`) has been rendered using this settings. ## Parameter Overview ### General Parameters - **Inner Width**: The inner width of the clip in [mm]. This is the outer width of the LED profile plus a small margin (i.e. +0.1mm) to make it snap in more easy. - **Inner Height**:T he inner height of the clip in [mm]. This is the outer height of the LED profile plus a small margin (i.e. +0.1mm) to make it snap in more easy. - **Length**: This is the length of the clip itself in [mm]. - **Shell Thickness**: Thickness of the arms and gripping ledge in [mm]. - **Shell Backing Thickness**: Thickness of the back of the clip in [mm]. I found that, having less then 2mm can cause issues while printing. ### Gripping Ledge Settings - **Gripping Ledge Size**: Size of the gripping ledge in [mm]. - **Gripping Ledge Snap**: Enable snap-on for the gripping ledge. ### Screw Settings - **Screw Diameter**: Diameter of the hole for the screw in [mm]. - **Screw Head Diameter**: Diameter of the screw head in [mm]. - **Screw Head Height**: Height of the screw head in [mm] ## History - **2019-12-04** Initial upload. :)
Statistics
Likes
44
Downloads
0