Raspberry Pi Alienware Case
Description
UPDATE: 12/9/2019 Rev 2 - Lowered RPi and added cutout in shell for USB power cables Raspberry Pi enclosure inspired by Alienware Predator PC case from 2003. Tested with RPI 3 and 4. I'm using a 90degree USB adapter for power To print shell without supports use the FDM optimized file and allow single perimeter walls settings for the base. Used one M2.5 brass inserts + M2.5 flat head screw to fasten shell to case https://www.mcmaster.com/94180a321 Thread-forming screws for plastic used to fasten RPi to tray: https://www.mcmaster.com/96817a212 Grill is printed with a lot of supports (i.e. 2.5 hour print, mostly support)
Statistics
Likes
63
Downloads
0