Klinik R/C Cougar KC Laydown Battery Cradle Holder #KRC-SCHCRADLE
Description
You swap batteries on every race. It takes time and the location is weird (next to the motor wires). I noticed some fellows had this klinik battery holder with the rubber band. Fusion 360, a few hours, 4 versions down the line and here you are! print and enjoy! 2 rubber bands needed or even better, hair bands from the wife (as per photo) 2 longer screws and 2 nuts and 2 washers. you can flip it (front to back) for extreme battery positions. tried the PLA version. racing indoors. lots of jumps. a few crashes. holder still intact. The nylon version or CF will be even stronger. the rubber band holding pins look thin and fragile but the forces are not strong enough to brake them. and you want them small enough, for the battery to be close to the motor version 2 was too big for my lipo version 3 was too tall (and strong) and 90o edges (the blue printed) version 4 in the car on the photos (the gold printed) 4mm thick version 5 - 5mm thick (Stronger) and wider area for the screws (more movement) update 20/04/2021 latest version is klinik battery holder 5mm.stl and is slightly stronger. with longer by 1mm pins for the rubber. print it in PETG ( 230oC nozzle, 75oC bed) and is very strong! also added connection where the screws are - you can cut it - if needed - for additional strength. see last photo.
Statistics
Likes
2
Downloads
0