Unifi Flex G3 L-Mounts
Description
The camera comes with a couple mounts, but they are somewhat limited since the camera cannot be mounted horizontally - Only upright or upside down *(This may change in the future if the software allows the correct orientation)*.. This cameras horizontal pivot ability is limited as well, so mounting with the back to a wall may cause blind spots since it cannot be rotated 90 degrees. This mount allows you to mount the camera 90 degrees from the wall so that you can utilize the pivot and avoid blind spots. Left = With the camera facing you, the vertical tab will be on the left. Right = With the camera facing you, the vertical tab will be on the right (The photo is of the left) I used the following hardware to mount: 6 x 3/4 / M3.5 x 19 (For mounting to the wall) 1/4 x 20 D-Ring Camera Screw
Statistics
Likes
4
Downloads
0