The 1/64 Diecast Car n-Lanes Starter Box
Description
"THE N-LANES DIECAST CAR STARTER BOX" can be used as a starter for a multi lane diecast car race track. Just print as many boxes as you like and connect them with the connector piece. I have tested 4 Lanes so far which works quite nicely. Print settings: track: 10% Infill. print upright with raft. no supports lid: print outside downwards thestick: no special settings starter: print on the side with 20% infill supports from the bed lever: print upright on the side with 20% infill and supports box: print upright. thin walls shouldnt be too worried about infill. might aswell use 100% knob.stl: no special settings. wider end to the bed... For assembly I used four M4 with M4 inserts to fix the track and close the box. Also four M4 screws and nuts to connect the boxes. 1 short and one long connector plus 8 washers per connected 2 boxes. Enjoy,...
Statistics
Likes
214
Downloads
0