Nerf Rival Soldier 76 Extended Hopper
Description
This is an extended hopper for the Soldier 76 rifle for those of you who feel it is a bit undersized. The expanded sized brings it up to roughly 150 rounds. My illustration print isn't quite perfect, but it's a solid fit, elephant feet notwithstanding. To mount: * remove the original door * Mount the middle section first, with the larger tabs in the front of the door lock then slide it back until the lock is engaged. * The front and back should then slide into and clip in place. Additional notes: Some trimming may be needed on the lock tabs and a little force may be needed to get them flush depending on wall thickness. Be careful not to use too much infill as the "legs" need to flex a little to clip in place. The feed channel lips on this blaster are a little tight, preventing smooth feeding without occasionally shaking or tilting the blaster up. I used this door, but any speed loader door should work. https://www.thingiverse.com/thing:150077
Statistics
Likes
15
Downloads
0