FETtec Spike Absorber Mount (w/ Optional Antenna Mount) (ImpulseRC Apex)
Description
A mount to hold the [FETtec Spike Absorber](https://fettec.net/shop/fettec-spike-absorber) on a 20x20mm. It is shaped to fit over the [ImpulseRC Regulator Board](https://impulserc.com/collections/apex-spares/products/apex-regulator-board) for the Apex. I used M2x16 bolts to mount it. Update: I added a new top cap which can hold your antenna. The "InsAntennaMount" model is for insulated SMA connectors like the TrueRC Matchsitck antenna. (2) M2x16 bolts with nuts (2) M2x20ish bolts (2) M3x6mm bolts to hold in the antenna. The 20mm bolts do not screw in, it acts to add rigidity to the mount. Use the barrel nuts (that go under the regulator board) that came with the Apex Kit to hold the bolt in. The Antenna Mount will be "sandwinched" between the Apexs' top plate and the regulator, holding it in place.
Statistics
Likes
5
Downloads
0