Desk Vise
Description
This is a small desktop vise I designed for a project and for personal use. At full scale it is about 6 x 4" and has 2.75" of travel. You will need a 6" 3/8" fully threaded bolt, (2) 3/8" nuts, and I used (2) metal washers with (2) Nylon washers against the vise base. The nut for the slide along with the knob will need to be glued. I also chose to lock in the back nut with glue so it does not come loose. I have included the files for a replaceable grooved block and a blank block. I printed mine with PLA at 30% infill and 1.6mm wall thickness
Statistics
Likes
123
Downloads
0